JX LCLYL BDM Frame With Adapters Set Fit Original FGTECH BDM100 Programmer CMD/ETC

JX LCLYL BDM Frame With Adapters Set Fit Original FGTECH BDM100 Programmer CMD/ETC
  • Продавецpropiedadescuernavaca.com
  • Список ценUS $28.48piece
  • Продажная ценаUS $28.48piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,3 (914)

Oписание продукта

 

 

 

 

 

 

 

 

Highest quality KESS V2 V2.32 FW V4.036  + KTAG V2.13 FW V6.070 2016 + BDM Frame Newest OBD2 Tuning Kit NoToken Limit  

 

 

 

 

Note : 

1. Can\'t connect internet with your laptop when you use kess v2/ktag, can\'t Update, or kess v2/ktag will damaged.

2. Do not use old version software together, otherwise will cause errors

3. Please install kess v2 and ktag in different laptop, if you have no experiences, please learn some knowledges online.

 

 

1.KESS

 

Software Version: V2.32
Hardware Version: V4.036

KESS V2 OBD2 Manager Tuning Kit without Tokens Limitation

With coverage of all major brands and protocols including Line, CAN, EDC17 and MED17 and For-d J1850. 

Kess V2 is everything you need to work as a successful tuner at a very af f0rdable price.
 
 
Kess V2 has several built in features and safeguards including:
1. Check of the battery voltage in real-time
2. Full Recovery function in case of problems
3. Automatic correction of the Checksum, (where available)
4 Boot-Loader mode supported
5. Management of the programming counters
6. ScanTool function to remove DTC
7. Several options of reading/writing speed
8. Option to write full file/section of the map
9. Full integration with ECM Titanium
 
Notice:
1. Please do not update this tool online, or It will get damaged
2. Please Do remember disconnect internet when you use it
3. No Token Limitation
 

Notice: 

1. Please do not update this tool online, or It will be damaged.

2. Please Do remember disconnect internet when you use it.

3. About No Token Limitation, Kess V2 has 60 Tokens, when you use it up, 

you can use Kess V2 CPU Repair Chip to reprogram and get another 60 Tokens.

 

 

 
Kess V2 has several built in features and safeguards including:


1. Check of the battery voltage in real-time
2. Full Recovery function in case of problems
3. Automatic correction of the Checksum, (where available)
4 Boot-Loader mode supported
5. Management of the programming counters
6. ScanTool function to remove DTC
7. Several options of reading/writing speed
8. Option to write full file/section of the map
9. Full integration with ECM Titanium,which means it can work with ECM Titanium perfectly

 

DSCF2432_DSCF2439_

DSCF2444_

2. KTAG :

Features:

K-TAG ECU Programming Tool is designed entirely around the needs of our customers to be more responsive and reliable. A true champion of innovation, K-TAG introduces another brand new novelty to Alientech world: J-Tag communication for Asian vehicles.

Software Version: V2.13
Hardware Version: V6.070

 

NO Tokens Limited!!!

Note: Please don\'t try to update the KTAG, it will damage the tool and can not use any more,Or only send back for repair which cost money and time. 

         Disconnect your computer internet when using it !!

 Languages :

Italian Deutsch English French Portuguese Spanish

 

 

KTAG Description:

The new K-TAG is 100% J-Tag compatible, but in a completely different way. Usually J-Tag programmers are available only for big productions, never present in chiptuning devices. Using only the essential components, Alientech have merged J-Tag, Motorola BDM/Nexus and Bootloader Mits--ubishi/Infn Tricore/ST communication lines into a single product.

K-TAG works in perfect harmony. Learn how to use K-TAG takes almost no time, because all the communication protocols operate along similar principles. Once you have learned to use a protocol, you will naturally use all the others. Alientech knows what it means to work in motion. For this reason the research methods of the protocols and choice of vehicles are detailed and ordered.

 

Unlike many ECU programming tools, with K-TAG you have at your disposal only the applications you really need. Once you have the hardware, you can choose which group of protocols to enable and then start working. In this page you can find a complete list of the ECU currently supported by K-TAG.

 

Just as the full range of Alientech programmers, K-TAG is available both in Master and Slave version. This way, Slave user can rely on the larger network of Master in the chiptuning field.The only thing that K-TAG does not do: OBD Communication. But for that you can count on KESSv2.

To use K-Tag at best on any kind of Electronic Control Unit, Alientech offers you a wide range of special adapters, to be soldered on the ECU or to be used on the positioning frame.

 

Fllowing details of the accessories available in car list catalog per each group of protocols of communication

 

BDM Motorola MPC5XX


14AS00T01S: Adapter to be soldered to the ECU
14AS00T02S: Cable with connector to be soldered to the ECU
14AS00T03S: Adapter to be soldered to the ECU
14AS00T04S: Adapter to be soldered to the ECU
14AM00T00M: Board for connection through positioning frame
14AM00T01M: Board for connection through positioning frame
14AM00T02M: Board for connection through positioning frame
14AM00TBAS + 14AM00TB01: Board for connection through positioning frame, with pull-out tip 14AM00TB01
14AM00TBAS + 14AM00TB02: Board for connection through positioning frame, with pull-out tip 14AM00TB02
14AM00TBAS + 14AM00TB03: Board for connection through positioning frame, with pull-out tip 14AM00TB03


J-TAG Nexus MPC5xx


14AS00T05S: Adapter to be soldered to the ECU
14AM00T05M: Board for connection through positioning frame
14AM00T06M: Board for connection through positioning frame


J-TAG RENESAS SH705xx

14AM00T07M: Write Board for connection through positioning frame
14AM00T08M: Write Board for connection through positioning frame
14AM00T09M: Write Board for connection through positioning frame
14AM00T10M: Read Board for connection through positioning frame
14AM00T11M: Read Board for connection through positioning frame

 

 

Just as the full range of Alientech programmers, K-TAG is available both in Master and Slave version. This way, Slave user can rely on the larger network of Master in the chiptuning field.The only thing that K-TAG does not do: OBD Communication. But for that you can count on KESSv2.

To use K-Tag at best on any kind of Electronic Control Unit, Alientech offers you a wide range of special adapters, to be soldered on the ECU or to be used on the positioning frame.
 
Fllowing details of the accessories available in car list catalog per each group of protocols of communication
BDM for Motorola MPC5XX
14AS00T01S: Adapter to be soldered to the ECU
14AS00T02S: Cable with connector to be soldered to the ECU
14AS00T03S: Adapter to be soldered to the ECU
14AS00T04S: Adapter to be soldered to the ECU
14AM00T00M: Board for connection through positioning frame
14AM00T01M: Board for connection through positioning frame
14AM00T02M: Board for connection through positioning frame
14AM00TBAS + 14AM00TB01: Board for connection through positioning frame, with pull-out tip 14AM00TB01
14AM00TBAS + 14AM00TB02: Board for connection through positioning frame, with pull-out tip 14AM00TB02
14AM00TBAS + 14AM00TB03: Board for connection through positioning frame, with pull-out tip 14AM00TB03
 
J-TAG Nexus MPC5xx
14AS00T05S: Adapter to be soldered to the ECU
14AM00T05M: Board for connection through positioning frame
14AM00T06M: Board for connection through positioning frame
 
J-TAG RENESAS SH705xx
14AM00T07M: Write Board for connection through positioning frame
14AM00T08M: Write Board for connection through positioning frame
14AM00T09M: Write Board for connection through positioning frame
14AM00T10M: Read Board for connection through positioning frame
14AM00T11M: Read Board for connection through positioning frame
 
BOOTLOADER INFOTRICORE
14P600KT04: Board for connection through positioning frame
 
BOOTLOADER ST10
14AM00T03M: Board for connection through positioning frame
 

DSCF1656_DSCF1703_

3. FGTech Galletto 4 Master v54

 

FG Tech Galletto 4 -Master V54 BDM-TriCore-OBD is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode Tricore, checksum. This item cannot only work as FGTech Galletto 4-Master, but can also work for BDM-TriCore-OBD.

Descriptions for FGTech Galletto 4-Master BDM-TriCore-OBDFGTECH GALLETTO 4 MASTER ( BDM-TriCore-OBD )
(MPC5xx - EDC17 - n TriCore - ST10Fxx - OBD2 (K-CAN)

 

1. Multiple- Language: Italiano, English, Deutsch, Francais, Espanol, Portugues, Czech, Turkish

 

2. FG Tech Galletto 4 Master V54 is the newest version of FG Tech Galletto V52/V53, the product is better than V52/V53.

it supports BDM function, and have no time limit

 

3. Software: latest version

 

 

 

FGTech Galletto 4 Master v54

 

 

FGTech Galletto 4-Master this new system developed with high-speed USB2 technology is the fastest and most secure product on the market, it is easy to install and use by anyone. Our system comes furnished complete with all Car, Truck, Motorbyke, Marine, BDM MPCxx , BDM Boot Mode Tricore, checksum.

 

 

 

 

Boot Mode System TriCore

 

 

NEW JTAG - BDM - MOTOROLA - FREESCALE -
Freescale MPC 5553/5554/5565/5566 NEXSUS PORT New IAW MJD 8F2 - Mair 8G MF
New Delphy DCM3.5xx DCM3.7xx TRW
Motorola Freescale MPC 555/556/561/562/563/564/565
Motorola MC 68332 - MC YQQCU - MC 68377 Trionic 5/7/8 G- M   O-P-EL-SAAB
Motorola MC 68376 Campi 01 Lam-  b0rghini - Lotus
Motorola MC 68336 MEMS D5 ROVER
Motorola ZC 439615 - ZC 439507 IAW Fi-A-T - V-  A G
New Line OBD protocols VPM G- M - H  ummer-Corvette-Munstang-Blazer-Cadilac
New Line OBD protocols Tx-Rx - S  ubaru - Mitsubischi - Hitachi - Denso ecu
All EDC17 MED17 is good always modify with Boot Mode tricore.

 

 

 

Automatic Checksum
All old protocols included from B-  osch MExx / EDCxx / Marelli / Siemens / Delpy / Lucas / Denso
Boot Mode C167x / ST10, Boot Mode In Tricore With password B- osch , Siemens
Motorola MC68332 - MCYQQCU - MC68377 , MC68376 , MC68336, ZC439615 ,ZC439507
Motorola Freescale MPC 555/556/561/562/563/564/565
Freescale MPC 5553/5554/5565/5566
BDM Tricore.

5-30V Car / Industrial Vehicles, L line / K line KWP, CAN
Can Bus V2.0 50Kb > 1000Kb
J1850 VPW PWM G--M -   F--ORD
Rx Tx RS232,
RS 485,
Automatic setup Pull up K-L line 250, 500, 1000 ohm,
Automatic setup termination Can bus 0, 60,120 ohm,

 

 

 

Master Version
Recovery Mode Completa
Funzione scan tool per eliminare i DTC
Function scan tool for erase the DTC
Controllo tensione di batteria auto in tempo reale
Check tension of battery car in real time

The interface works with this Operating System:
Windows 2000
Windows XP - 32 bit / 64 bit
Windows Vista 32 bit / 64 bit
Windows 7- 32 bit / 64 bit


HTB1LQEoIpXXXXXhXXXXq6xXFXXXmHTB1yThOKXXXXXXiXXXXq6xXFXXX3

4.  BDM Frame

 

BDM FRAME with Adapters Set Fit Original FGTECH
BDM FRAME with Adapters Set made from hight quality Plexiglass ,can use on BDM100 programmer , CMD,ETC. )
151234

 

HTB11MVrKXXXXXb1XFXXq6xXFXXXT

 

 

 

Please Notic: Because manufactures will have no advanced notic of changes to product packaging,place of origin or some accessories,we can\'t ensure that customers receive the goods are exactly the same with the store picture, and product description. But we can ensure that the products all the same with good quality on the market.If we doesn\'t update the picture or related information in time, please make a better understanding.

 

1.We offer good quality products,lower price, and best services,and three year warranty.
2.The products in my store are the newest in the Chinese market.
3.We can make the shipment at the day when your payment confirmed on Aliexpress.
4.We will be appraciate if you are satisfied with our products and services. And we sincerely hope to establish long-term cooperation relation ship.
5.We would like to send you some traditional Chinese gifts for your every time order. And you can tell me what you would like. We will try out best to fullfil your requests.

 

1.We can accept all kind of payment.
2.Please confirm the product and the shipping address. And please leave us message to tell how much value can be write suitable about the products.
3.We will arrange the delivery after the comfirmation on the Aliexpress. Please do not ask for shipping once you place the order. Many thanks!
4.We will leave you message to tell you the tracking number after the order shipped.And please contact us if you have any question about the shipping.

 

1.We will send the order after the Aliexpress confirmed the order.About the shipping time,Generally Speaking,3~5 days for DHL/UPS delivery.7~10 days for EMS delivery.15~30 days for HK Post Air Mail delivery.
2.Please notice that if your shipping address is a remote area for DHL, you need to pay other 36usd for the remote shipping fees.
3.Please leave us message to tell us the order value which we can write on the package. We have much experience on customs clearance. Please tell us what is the best price for you for declared value of the package, so that you can avoid to pay high tax.As we know,Hungary, Russian Federation and TURKEY have strict import policy, so if your package is going to those countries, you must quite familiar with the policy and tell us what is the best. If you are from Brazil, you must provide your CPF NUMBER(TAX NUMBER).

 

1.Please contact us within 3 days after you receive the parcel if you get a defective item.
2.If you are not satisfied with our producs and want to return to us, please make a contaction with us within 7 days after you recieved the order.Or we will not make a replacement or refund.
3.When you return a product to us, please send back with original package and provide tracking number .And you need to undertake the back shipping charge.So please be carefull before place an order.
4.We will refund when we recieved the back product.If you want a replacement,you will charge the back shipping fee,and we will charge the shipping fee back to you.

 

1.We will really appraciate your early confirmation when received the order.
2.Since your feedback is very important to our business\'s development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. It\'ll just take you 1 minute,but this 1 minute has the extremely vital significance to us.
3. Please contact us before leaving any negative or neutral feedback. We will work with you to solve any problems.Thank you for your understanding!

 

1.Our working time is from 8:30 am - 23.00pm.
2.Please leave us message if you have any question or problems when we not online. We will give you a response when we got your message.

3.We warmly welcome your inquiry at any time
4.Please leave us message at Trademanager cn1510414160.

KissRoseLoving Heart