Network Diagnostic Tool Kit Voltage Detector Punch Tool Cable Crimper Crimping RJ45 RJ11 Cable Ethernet Line LAN Wire Tracker

Network Diagnostic Tool Kit Voltage Detector Punch Tool Cable Crimper Crimping RJ45 RJ11 Cable Ethernet Line LAN Wire Tracker
  • Продавецpropiedadescuernavaca.com
  • Список ценUS $77.63piece
  • Продажная ценаUS $77.63piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,8 (734)

Oписание продукта

Description:

Product features:

 

1.Capable to test open circuit, short , cross connection, reverse connection and pairing connection and broken wire positioning .

2.To make a accurate determination of open circuit position (left, right or middle).

3.To quickly find the target wire or cable among the plenty of wires.

4.To perform crosstalk test on network cable for solving the potential problem of slow speed.

5.Capable to measure cable length such as network cable, coaxial cable, telephone cable and USB cable with three methods (M-S, M-R and OPEN).

6.A tester to perform cable tracking on exchanger or Router with power-on.

7.Utomatic delay power on-off and backlight function.

8.Self-test function shall automatically make compensation due to change of battery level and ambient temperature.

 

 

 
Specifications:
 
Display: Dot matrix 128 x 64 (effective visible area is 56 x 40mm)
Testing and Detecting Cable types:
STP / UTP
5E
6E
network cable
Telephone cable
Coaxial cable
USB signal cable
Common metal wires connected with alligator clip
Testing device interface:
Main unit: RJ45 (M)
RJ45 (S)
Loop interface
BNC connector
USB B-type female interface
Remote identifier:
RJ45
RJ11
BNC connector
USB A-type female interface
Length measurement
Range: 1 ~ 1200m
Calibration precision: 2% (± 0.5m, or ± 1.5 feet); (calibration; cable> 10m)
measurement precision: 3% ((± 0.5m or ± 1.5ft); (AMP, CAT5E, 6E cable material)
Display unit: meter, inch, yard
Length calibration: User may use a cable at a known length to set a calibration coefficient. Calibration length is over 10m
Line sequence and cable failure positioning: used for Lind Finding two-core cable or cable with over two cores
Line finding function: used for Lind Finding two-core cable or cable with over two cores
Operating Environment
Temperature: -10 ° ~ 60 ° C
Humidity: 20% ~ 70%
Power Supply:
Master: 9V compound tandem cell
Receiver: 9V compound tandem cell
Overall dimensions
Main tester: 185 x 80 x 32mm
Receiver: 218 x 46 x 29mm
Remote identifier: 107 x 30 x 24mm
Accessories included:
 
1 x Network Cable Tester
1 x receiver unit
1 x remote identifier
1 x RJ45 cable
1 x RJ11 cable
1 x RJ11 to Alligator clip Converter
1 x Earphone
User Manual
Colored Packaging Box 
 
12345